PRODUCTION
SUPPLY
EXPORT
SERVICES
PRODUCTION
SUPPLY
EXPORT
SERVICES

Heat-resistant emulsifier for OBM ALPHAERG-T

Universal heat-resistant emulsifier for invert emulsion oil-based solutions for drilling and killing wells. Has increased thermal stability at high temperatures and pressures (HTPD). The reagent is effective over a wide temperature range and in the presence of contaminants such as water, solids and cement. Weakens the negative effect on the solution when it is contaminated with water and solid phase.

Forms a brine-in-oil base emulsion used in oil-based drilling fluid systems. For the initial preparation of the system, it is necessary from 16 to 29 l / m³, depending on the density, oil-water ratio and target thermal stability. The effective action of the emulsifier is provided by an additional amount of lime from 5 to 15 kg / m³ during the initial preparation.
Receive an offer
Privacy Policy
Due to the formation of less viscous emulsions, it is not recommended to use the reagent when the concentration of organophilic bentonites is less than 10 kg/m³
Benefits of ALPHAERG-T
Large working temperature range
Resistant to both low and high (over 120 °C) temperatures
Good fluid rheology
Reduces the plastic viscosity of solutions and increases their electrical stability
Stability
Improvement of rheological stability, thermal stability and resistance of OBM to contaminants
Water resistance
Eliminates increased viscosity and reduced emulsion stability when contaminated with water