PRODUCTION
SUPPLY
EXPORT
SERVICES
PRODUCTION
SUPPLY
EXPORT
SERVICES
Thermogelling composition INTENSIOL-T
It is used to increase the oil recovery factor of reservoirs by increasing the sweep during waterflooding with primary and secondary stimulation of the reservoir, as well as isolating water inflow to wells. The injection of the composition passes through injection wells with the generation of a gel directly in the formation conditions, which allows the composition to penetrate much deeper into the formation.
The gel generated in the formation normalizes the injectivity profile of injection wells and promotes the production of low-draining interlayers, prevents water breakthrough from production and injection wells, which is reflected either in stabilization or in a decrease in the water cut of the produced oil. It is especially effective in the treatment of carbonate formations.
For wells with injectivity less than 300 m³ per day.
The gel generated in the formation normalizes the injectivity profile of injection wells and promotes the production of low-draining interlayers, prevents water breakthrough from production and injection wells, which is reflected either in stabilization or in a decrease in the water cut of the produced oil. It is especially effective in the treatment of carbonate formations.
For wells with injectivity less than 300 m³ per day.
Receive an offer
Privacy Policy
Low-curing
The low pour point of the reagent allows it to be used in the Far North
Eco-friendly
Lack of organic components in the composition and low toxicity (class 4)
Deep penetration
The composition can be used in low-permeability reservoirs
Wide temperature range
The composition can be used in fields with increased reservoir temperature (60-130 ° C)
Ease of use
Injected water can be used to prepare the composition.
Economical effect
Reduces unproductive injection in the reservoir pressure maintenance system by reducing water withdrawal into the formation zone and reducing interstratal flows